Lincoln Corsair Manuals

Lincoln Corsair: Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40 / Diagnosis and Testing - B Clutch

For B clutch operation,
REFER to: B Clutch (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Description and Operation).


  B clutch


Condition Possible Sources Action
B clutch does not apply SSB is mechanically stuck off INSTALL a new solenoid.
REFER to: Solenoid (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Removal and Installation).
B clutch control valve stuck off DISASSEMBLE, CLEAN and INSPECT the clutch control valve. If the bore or valve is damaged, INSTALL a new main control valve body.
REFER to: Main Control Valve Body (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
B CL CONTR, hydraulic circuit blocked/leaking DISASSEMBLE and INSPECT the main control valve body and separator plate passages for debris/blockage. CLEAN as necessary.
REFER to: Main Control Valve Body (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
B clutch piston seals INSPECT the components for wear and damage. CLEAN and/or INSTALL new components necessary.
REFER to: Transmission (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
B clutch drum/Reaction sun gear The B clutch drum and the C clutch hub are the same component. If diagnostics indicate both B clutch and C clutch failures, INSPECT the components for wear and damage. INSTALL new components as necessary.
REFER to: Transmission (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
B clutch friction plates INSPECT the components for wear and damage. INSTALL new components as necessary.
REFER to: Transmission (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
B clutch always applied SSB mechanically stuck INSTALL a new solenoid.
REFER to: Solenoid (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Removal and Installation).
B Clutch clutch control valve or B clutch latch valve stuck on DISASSEMBLE, CLEAN and INSPECT the regulator valve. If the bore or valve is damaged, INSTALL a new main control valve body.
REFER to: Main Control Valve Body (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
B CL CONTR, hydraulic circuit cross leaks DISASSEMBLE and INSPECT the main control valve body and separator plate passages for leaks or damage. INSTALL new components as necessary.
REFER to: Main Control Valve Body (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
B clutch friction plates INSPECT the components for wear and damage. INSTALL new components as necessary.
REFER to: Transmission (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
B clutch delayed/soft/slipping apply Incorrect transmission strategy programmed into PCM / TCM . PERFORM the Transmission Strategy Download,
REFER to: Transmission Strategy Download (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, General Procedures).
Low line pressure PERFORM line pressure test.
REFER to: Special Testing Procedures (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Diagnosis and Testing).
SSB mechanically sticking INSTALL a new solenoid.
REFER to: Solenoid (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Removal and Installation).
B clutch control valve or B clutch latch valve sticking DISASSEMBLE, CLEAN and INSPECT the valves. If a bore or valve is damaged, INSTALL a new main control valve body.
REFER to: Main Control Valve Body (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
B CL CONTR, hydraulic circuits blocked/leaking DISASSEMBLE and INSPECT the main control valve body and separator plate passages for debris/blockage. CLEAN as necessary.
REFER to: Main Control Valve Body (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
B clutch piston seals INSPECT the components for wear and damage. INSTALL new components as necessary.
REFER to: Transmission (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
B clutch friction plates INSPECT the components for wear and damage. INSTALL new components as necessary.
REFER to: Transmission (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
B clutch harsh apply Incorrect transmission strategy programmed into PCM / TCM . PERFORM the Transmission Strategy Download,
REFER to: Transmission Strategy Download (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, General Procedures).
High line pressure PERFORM the line pressure test.
REFER to: Special Testing Procedures (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Diagnosis and Testing).
SSB mechanically sticking INSTALL a new solenoid.
REFER to: Solenoid (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Removal and Installation).
B clutch control valve sticking, weak or broken B clutch latch valve spring DISASSEMBLE, CLEAN and INSPECT the valves. If a bore, valve, or spring is damaged, INSTALL a new main control valve body.
REFER to: Main Control Valve Body (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
B CL CONTR hydraulic circuit blocked/leaking DISASSEMBLE and INSPECT the main control valve body and separator plate passages for debris/blockage. CLEAN as necessary.
REFER to: Main Control Valve Body (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
B clutch friction plates INSPECT the components for wear and damage. INSTALL new components as necessary.
REFER to: Transmission (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
B clutch piston return springs INSPECT the components for wear and damage. INSTALL new components as necessary.
REFER to: Transmission (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).

    Diagnosis and Testing - A Clutch

    Principles of Operation For A clutch operation, REFER to: A Clutch (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Description and Operation)...

    Diagnosis and Testing - C Clutch

    Symptom Chart For C clutch operation, REFER to: C Clutch (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Description and Operation)...

    Other information:

    Lincoln Corsair 2020-2025 Owners Manual: What to do after the Tire has been Sealed


    After using the kit to seal your tire, you will need to replace the sealant canister. Sealant canisters and spare parts can be obtained at an authorized Ford dealer. Empty sealant canisters may be disposed of at home. However, canisters still containing liquid sealant should be disposed of by your local authorized Ford dealer or tire dealer, or in accordance with local waste disposal regu..

    Lincoln Corsair 2020-2025 Service Manual: Removal and Installation - Thermostat


    Materials Name Specification Motorcraft® Silicone Brake Caliper Grease and Dielectric CompoundXG-3-A ESA-M1C200-AESE-M1C171-A  Removal NOTE: Removal steps in this procedure may contain installation details. Drain the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding (303-03A Engine Cooling - 2.0L EcoBoost (177kW/240PS) ..

    Categories

    Creating a Vehicle Wi-Fi Hotspot

    You can create a Wi-Fi hotspot in your vehicle and allow devices to connect to it for access to the Internet.

    Lincoln Corsair. Creating a Vehicle Wi-Fi Hotspot Select the settings option on the feature bar.

    Press Lincoln Connect. Press Vehicle Hotspot.

    read more

    Copyright © 2025 www.licorsair.com