Lincoln Corsair Manuals

Lincoln Corsair: Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40 / Diagnosis and Testing - E Clutch

Lincoln Corsair 2020-2024 Service Manual / Powertrain / Automatic Transmission / Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40 / Diagnosis and Testing - E Clutch

Symptom Chart

E clutch

For E clutch operation,
REFER to: E Clutch (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Description and Operation).


  E clutch


Condition Possible Sources Action
E clutch does not apply SSE is mechanically stuck off INSTALL a new solenoid.
REFER to: Solenoid (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Removal and Installation).
E clutch control valve stuck off DISASSEMBLE, CLEAN and INSPECT the clutch control valve. If the bore or valve is damaged, INSTALL a new main control valve body.
REFER to: Main Control Valve Body (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
E CL CONTR, hydraulic circuit blocked/leaking DISASSEMBLE and INSPECT the main control valve body and separator plate passages for debris/blockage. CLEAN as necessary.
REFER to: Main Control Valve Body (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
E clutch piston seals INSPECT the components for wear and damage. INSTALL new components as necessary.
REFER to: Transmission (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
E clutch hub INSPECT the components for wear and damage. CLEAN and/or INSTALL new components as necessary.
REFER to: Transmission (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
E clutch friction plates INSPECT the components for wear and damage. INSTALL new components as necessary.
REFER to: Transmission (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
E clutch always applied SSE mechanically stuck INSTALL a new solenoid.
REFER to: Solenoid (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Removal and Installation).
E clutch control valve or CL E latch valve stuck on DISASSEMBLE, CLEAN and INSPECT the clutch control valve. If the bore or valve is damaged, INSTALL a new main control valve body.
REFER to: Main Control Valve Body (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
E CL CONTR, hydraulic circuit cross leaks DISASSEMBLE and INSPECT the main control valve body and separator plate passages for leaks or damage. INSTALL new components as necessary.
REFER to: Main Control Valve Body (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
E clutch hub, clutch and planetary carrier, No. 4 ring gear INSPECT the components for wear and damage. INSTALL new components as necessary.
REFER to: Transmission (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
E clutch friction plates INSPECT the components for wear and damage. INSTALL new components as necessary.
REFER to: Transmission (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
E clutch delayed/soft/slipping apply Incorrect transmission strategy programmed into PCM / TCM . PERFORM the Transmission Strategy Download,
REFER to: Transmission Strategy Download (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, General Procedures).
Low line pressure PERFORM line pressure test.
REFER to: Special Testing Procedures (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Diagnosis and Testing).
SSE mechanically sticking INSTALL a new solenoid.
REFER to: Solenoid (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Removal and Installation).
E clutch control valve sticking DISASSEMBLE, CLEAN and INSPECT the valve. If the bore or valve is damaged, INSTALL a new main control valve body.
REFER to: Main Control Valve Body (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
Gain control valve stuck in default position. DISASSEMBLE, CLEAN and INSPECT the valve. If the bore or valve is damaged, INSTALL a new main control valve body.
REFER to: Main Control Valve Body (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
E CL CONTR, E CL-FB2 hydraulic circuits blocked/leaking DISASSEMBLE and INSPECT the main control valve body and separator plate passages for debris/blockage. CLEAN as necessary.
REFER to: Main Control Valve Body (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
E clutch friction plates INSPECT the components for wear and damage. INSTALL new components as necessary.
REFER to: Transmission (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
E clutch piston seals INSPECT the components for wear and damage. INSTALL new components as necessary.
REFER to: Transmission (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
E clutch harsh apply Incorrect transmission strategy programmed into PCM / TCM . PERFORM the Transmission Strategy Download,
REFER to: Transmission Strategy Download (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, General Procedures).
High line pressure PERFORM line pressure test.
REFER to: Special Testing Procedures (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Diagnosis and Testing).
SSE mechanically sticking INSTALL a new solenoid.
REFER to: Solenoid (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Removal and Installation).
E clutch control valve sticking DISASSEMBLE, CLEAN and INSPECT the valve. If the bore or valve is damaged or worn, INSTALL a new main control valve body.
REFER to: Main Control Valve Body (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
Gain control valve stuck in applied position DISASSEMBLE, CLEAN and INSPECT the valve. If the bore or valve is damaged, INSTALL a new main control valve body.
REFER to: Main Control Valve Body (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
E CL CONTR, E CL-FB2 hydraulic circuit blocked/leaking DISASSEMBLE and INSPECT the main control valve body and separator plate passages for debris/blockage. CLEAN as necessary.
REFER to: Main Control Valve Body (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
E clutch friction plates INSPECT the components for wear and damage. INSTALL new components as necessary.
REFER to: Transmission (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).
E clutch piston return springs INSPECT the components for wear and damage. INSTALL new components as necessary.
REFER to: Transmission (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Overhaul).

    Diagnosis and Testing - Hydraulic Selectable One-Way Clutch Assembly

    Symptom Chart For selectable one-way clutch operation, REFER to: Hydraulic Selectable One-Way Clutch Assembly (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Description and Operation)...

    Diagnosis and Testing - F Clutch

    Symptom Chart F clutch For F clutch operation, REFER to: F Clutch (307-01A Automatic Transmission - 8-Speed Automatic Transmission – 8F35/8F40, Description and Operation)...

    Other information:

    Lincoln Corsair 2020-2024 Owners Manual: General Information


    WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle...

    Lincoln Corsair 2020-2024 Service Manual: Removal and Installation - Auxiliary Power Point


    Special Tool(s) / General Equipment 501-194Remover, Power PointTKIT-2014D-ROW2TKIT-2014D-FL_ROW Removal Open the power point cover. Position the power point extractor so that it engages in the adjacent slots in the power point socket...

    Categories

    Autowipers (IF EQUIPPED)

    Wet or winter driving conditions with ice, snow or salty road mist can cause inconsistent and unexpected wiping or smearing.

    Lincoln Corsair. Autowipers (IF EQUIPPED)

    Autowipers On. High sensitivity. Low sensitivity.

    read more

    Copyright © 2024 www.licorsair.com