Lincoln Corsair: Remote Start / Remote Start Settings
Switching Climate Control Auto Mode On and Off
- Using the information display controls on
the steering wheel, select Settings.
- Select Vehicle.
- Select Remote Start.
- Select Climate Control.
- Switch Auto on and off.
Note: If you switch the auto mode on, the
system attempts to heat or cool the interior
to 72°F (22°C).
Note: When you switch the ignition on, the
climate control system returns to the last
used settings.
Note: The heated windshield, heated rear
window, heated mirrors, heated seats and
heated steering wheel could turn on in cold
weather.
Switching Climate Control Last Settings On and Off
- Using the information display controls on
the steering wheel, select Settings.
- Select Vehicle.
- Select Remote Start.
- Select Climate Control.
- Switch Last settings on or off.
Note: If you switch the last settings on, the
system remembers the last used settings.
Switching the Heated Seat Settings On and Off
- Using the information display controls on
the steering wheel, select Settings.
- Select Vehicle.
- Select Remote Start.
- Select Front Seats.
- Select Auto or Off.
Note: If you switch the heated seat settings
on, the heated seats turn on during cold
weather.
Note: You cannot adjust the heated seat
settings when you have remotely started the
engine.
Switching the Heated Steering Wheel Settings On and Off
- Using the information display controls on
the steering wheel, select Settings.
- Select Vehicle.
- Select Remote Start.
- Select Front Seats & Wheel.
- Select Auto or Off.
Note: If you switch the heated steering wheel
settings on, the heated steering wheel turns
on during cold weather.
Note: You cannot adjust the heated steering
wheel settings when you have remotely
started the engine.
Setting the Remote Start Duration
You can set a duration for the engine to run.
Note: Wait a few seconds before remotely
starting the engine after the engine stops
running.
- Using the information display controls on
the steering wheel, select Settings.
- Select Vehicle.
- Select Remote Start.
- Select Duration.
Extending the Remote Start Duration
To extend the engine running duration
during remote start, do the following:
Press the button on the remote
control...
Other information:
Bring the engine to normal operating temperature. Connect
the Vacuum/Pressure Tester to the intake manifold. Run the engine at the
specified idle speed.
The vacuum gauge should read between 51-74 kPa (15-22 in-Hg)
depending upon the engine condition and the altitude at which the test
is conducted. Subtract 4.0193 kPa (1 in-Hg) from the specified reading
for every 304.8 m (1,00..
Removal
WARNING:
Service actions on vehicles equipped with electronic brake
booster and electronic parking brakes may cause unexpected brake
application, which could result in injury to hands or fingers. Put the
brake system into service mode prior to servicing or removing any brake
components. Failure to follow this instruction may result in serious
personal injury.
NOTICE:
..