Adhesives
The correct adhesive bonding is essential to repairing the vehicle correctly. Adhesives and mechanical fasteners are used in certain areas of the body structure in place of welding. In addition to providing a structural bond between components, adhesives can also help prevent wind noise, water leaks, exhaust fumes and dust from entering the vehicle. They also provide anti-corrosion barriers.
Refer to specific component removal and installation procedures for correct application and location of adhesives.
Sealers
The correct sealing of joints is essential to repairing the vehicle correctly. Sealers are used to prevent wind noise, water leaks, exhaust fumes and dust from entering the vehicle. They also provide anti-corrosion barriers. Sealers are applied to areas such as doors hem flanges, wheelhouse, floor, cowl, roof and other panel-to-panel attaching point seams.
Sealers should remain flexible after curing and must be paintable. Follow the manufacturer's directions for correct application of these materials.
Any damage to originally sealed joints should be repaired by resealing. Along with attaching points of new panels, open joints that require bridging of sealer to close a gap should be sealed using a heavy-bodied sealer.
NOTE: The following illustrations are examples of sealer and adhesive application and are not all inclusive.
NOTE: Left hand side shown, right hand side similar.
Hood Sealer
Front Door Sealer
Rear Door Sealer
Liftgate Sealer
Body Sealers and Adhesives Overview
Dash and Cowl Sealers and Adhesives Overview
NVH Protection Material
NVH protection is necessary for road noise reduction. In the case of floor panel application, it also serves as a form of underbody heat control. It is paintable, very durable and has good resistance to abrasion. This material may be applied in many manners. It may be applied through the use of butyl patches, sprayed, rolled or brushed on (obtain locally).
Roof NVH Control
Floor Pan NVH Control
Front Door NVH Control
Rear Door NVH Control
You can create a Wi-Fi hotspot in your vehicle and allow devices to connect to it for access to the Internet.
Select the settings option on the feature bar.
Press Lincoln Connect. Press Vehicle Hotspot.